Epson 5500C - Manual (Page 76)

3 • Using the Projector Menus 66
Audio Menu
The Audio menu lets you make adjustments related to audio.
Mode Specifies the video signal system. Normally this signal system setting should
be left at AUTO to automatically detect the type of video signal. If automatic
selection is not possible for some reason, use this menu to manually specify
NTSC, PAL, or SECAM.
Reset Returns all menu items to their initial factory defaults.
Select this item and then press the Enter button (control panel) or a
multi-purpose button (remote) to display the confirmation screen. Next,
select Yes and then press a multi-purpose button (remote) or the Enter button
(control panel) to reset the Video Menu.
If you change your mind, select No and then press a multi-purpose button
(remote) or the Enter button (control panel) to clear the confirmation screen
without changing any settings.
Menu item Description
Volume Adjusts the volume level for the speakers and audio-out terminal.
Treble Adjusts the treble tone of the speakers. Press the right arrow button (control
panel) or press right on the pointer button (remote) to increase the treble tone;
press the left arrow button (control panel) or left on the pointer button
(remote) to decrease the treble tone.
Bass Adjusts the bass tone of the speakers. See Treble for details.
SRS SPACE Adjusts stereo sound. Increasing the value widens the sound.
Menu item Description
5500.book Page 66 Wednesday, August 4, 1999 4:41 PM