Epson 5500C - Manual (Page 43)

1 • Installation 34
3. Connect the audio cable, if needed.
a. Connect one end of the audio cable to the Audio In jack on
the projector.
b. Connect the other end of the audio cable to the Audio Out
port on your computer.
4. If you are using the optional ELP Link III software, see Chapter
4 for instructions for connecting the Link cables.
Note: After you turn on the projector and computer, you may need
to choose Mirroring in the Display Control Panel to display the
image on the LCD screen as well as the projector screen. See your
Macintosh documentation for details. (This step is not necessary on
some newer systems, which can detect a dual video signal.)
audio cable
Audio In jack
5500.book Page 34 Wednesday, August 4, 1999 4:41 PM