Epson 5500C - Manual (Page 61)

2 • Using the Projector 52
Using the Remote Control
The remote control uses a line-of-sight infrared signal. To use the
remote control, point it towards the infrared receiver located at the
front of the projector (see page 40).
Note: To be able to use the remote control as a wireless mouse,
make sure you have connected the mouse cable to the projector and
your computer. (See Chapter 1 for instructions.)
You can use the remote control up to 32.8 feet (10 meters) from the
projector. (This distance may be shorter if the remote control
batteries are low.) You must also be within a
± 30 ° angle from the
front receiver.
pointer button
top multi-purpose
button
bottom multi-purpose
button
5500.book Page 52 Wednesday, August 4, 1999 4:41 PM