Connecting to a powerbook – Epson 5500C User Manual
Page 94
Advertising
4 • Using the ELP Link III Software
84
Connecting to a PowerBook
The main cable included in your ELP Link III set connects the Mac
mouse cable (needed to use the remote control as a mouse) and Mac
serial cable (needed to use the ELP Link III software) to the
projector.
1. If you connected the Mac mouse cable included with the
projector as described on page 33, disconnect it from the
PowerBook and the projector.
2. Connect the round end of the main cable to the projector’s
Mouse/Com port.
Mac serial cable
Mac mouse cable
main cable
Mouse/Com port
5500.book Page 84 Wednesday, August 4, 1999 4:41 PM
Advertising