Epson 5500C - Manual (Page 45)

1 • Installation 36
Before beginning, turn off the projector and video source if they are
on.
1. Locate the appropriate video cable. If your video source uses a
small, round, one-prong composite (RCA) video connector,
you’ll need the audio/video (A/V) cable that comes with the
projector. If your video source uses a large, round, four-prong
S-Video connector, you will need to purchase the appropriate
cable or use the cable that came with your video source.
2. For composite video, connect the yellow RCA plug on one end
of the audio/video cable to the projector’s Video In jack.
Connect the other yellow RCA plug to the video-out jack of
your video source.
Connect the other plugs on the audio/video cable to the Audio
jacks of the projector: insert the white plug into the L jack and
the red plug into the R jack. Connect the plugs at the other end
of the audio/video cable to the audio output jacks of the video
source.
audio/video cable
Video In port L Audio
R Audio
5500.book Page 36 Wednesday, August 4, 1999 4:41 PM