Epson 5500C User Manual
Page 42
Connecting to a Computer
33
e. Connect the other end of the PowerBook video-out cable to
the projector video cable (with Macintosh desktop adapter
attached).
f.
Tighten the screws on all the connectors.
2. If you want to use the remote control as a mouse pointer for the
laptop, connect the mouse cable.
Note: If you’ll be using the optional ELP Link III software, skip
step 2, as you’ll need to connect the mouse cable included in the
ELP Link III set instead. Follow the instructions on page 84 to
connect the mouse cable.
a. Connect the small end of the projector’s Mac mouse cable
to the Mouse port on your laptop.
b. Connect the other end of the mouse cable to the projector’s
Mouse/Com port.
Mac mouse cable
Mouse/Com
port
5500.book Page 33 Wednesday, August 4, 1999 4:41 PM