Epson 5500C - Manual (Page 95)

Installing the Software 85
3. Connect one end of the Mac mouse cable included with the ELP
Link III set to the MOUSE terminal on the square end of the
main cable.
4. Connect the other end of the Mac mouse cable to the mouse port
on the back of the PowerBook.
5. Connect either end of the Mac serial cable to the SERIAL
terminal on the square end of the main cable. Connect the other
end of the Mac serial cable to the
printer or modem port
on the back of your PowerBook.
Note: After you turn on the projector and computer, you may
need to choose Mirroring in the Display Control Panel to
display the image on the LCD screen as well as the projector
screen. See your Macintosh documentation for details. (This
step is not necessary on some newer systems, which can detect a
dual video signal.)
6. Now install the software as described on page 87.
Installing the Software
ELP Link III software can be used with the following operating
systems:
●
Windows 3.x
●
Windows 95
●
Windows 98
●
Windows NT 4.0
5500.book Page 85 Wednesday, August 4, 1999 4:41 PM