Epson 5500C - Manual (Page 24)

Attaching the Hand Strap 15
●
To connect the projector to an external sound system, you need
an RCA-to-3.5 mm stereo audio cable. You can obtain one from
your computer dealer.
●
To use the remote control when the projector is not in
line-of-sight of the remote, you need an optional infrared
repeater. For more information, call (800) 843-5465 or visit this
web address: www.xantech.com.
●
To connect a serial mouse cable to your computer, you may
require a special connector, cable, or other components. You
can obtain these items from your computer dealer.
●
To protect your projector, you can connect a Kensington
MicroSaver
® anti-theft device in the hole on the right side of the
projector. Contact your local computer dealer.
Attaching the Hand Strap
1. Place the projector on its right side.
✦ Caution: Do not hold or lift the projector by the lens. This can
damage the lens.
5500.book Page 15 Wednesday, August 4, 1999 4:41 PM