Epson 5500C - Manual (Page 38)

Connecting to a Computer 29
e. If you wish to view or check images on the computer’s
monitor, attach the large end of the Macintosh monitor
adapter to the monitor cable and connect the monitor to the
projector’s Computer Out port.
f. Tighten the screws on all connectors.
2. If you want to use the remote control as a mouse pointer for the
computer, connect the mouse cable.
Note: If you’ll be using the optional ELP Link III software, skip
step 2, as you’ll need to connect the mouse cable included in the
ELP Link III set instead. Follow the instructions on page 82 to
connect the mouse cable.
Mac mouse cable
Mouse/Com
port
5500.book Page 29 Wednesday, August 4, 1999 4:41 PM