Honeywell EN2Z-0906GE51 R0708 - Manual (Page 106)

ARENA / RANGER USER GUIDE
EN2Z-0906GE51 R0708 106
2. Click Edit Datapoints. The Edit Datapoints dialog box displays.
3. In
Default Occupied Value , enter the value in degrees Celsius for the occupied
state.
4. In Default Unoccupied Value , enter the value in degrees Celsius for the
unoccupied state.
5. Check Optimization checkbox, if you want to apply optimization. For detailed
description of Optimization, please refer to step 3 in the “Create Daily Schedule”
section.
6. Click OK button. From now on these settings will be the default settings when
creating a new switchpoint for a daily schedule.
Create Daily Schedule
1. In the Schedules tree, right-click on the Daily schedules folder of the room
control, you want to create a new daily schedule for.
2. Click Add. A new daily schedule, called ´DPDaily1` (´DPDaily2`, etc.) is created
in the tree. The daily schedule is blank, i.e. it has no switchpoints yet.