Honeywell EN2Z-0906GE51 R0708 - Manual (Page 92)

ARENA / RANGER USER GUIDE
EN2Z-0906GE51 R0708 92
b. In Destination, select the destination to which the alarms should be
forwarded.
c. Check Enabled if the forwarding should be active and check the days on
which the triggered alarms should be forwarded to the selected destination.
d. Enter the time range for each day.
4. Click the Advanced tab.
Advanced Tab
Settings
a. Check Delay notification if the alarms should be forwarded when the alarm
buffer has reached the number of alarms entered in Buffer.
b. In Buffer, enter the number of alarms after which the alarms should be sent.
c. Check Only send alarm if not yet cleared if the alarm should only be
forwarded if it is not cleared. .
Uncheck Only send alarm if not yet cleared if a cleared alarm should also
be sent.
d. Check Only send alarm if not yet acknowledged if the alarm should only
be forwarded if it is not cleared.
Uncheck Only send alarm if not yet acknowledged if an acknowledged
alarm should also be sent.
e. In Notification type, select the point when the alarms are sent after the
alarm buffer is full:
– Immediately
– Never
– Next
connection
f. Select Infinite if ARENA should attempt to forward the alarm forever until
forwarding is successful.
g. Select Limited to … days if ARENA should stop forwarding the alarm after
the number of days entered.
5. Click OK button.