Honeywell EN2Z-0906GE51 R0708 - Manual (Page 121)

USER GUIDE ARENA/ RANGER
121 EN2Z-0906GE51 R0708
NOTE: Add only those datapoints to trend which you really want to trend since
trending increases bus traffic and has negative impact on the system
performance.
1. Hover the cursor over the Configuration menu icon
and click Trending
in the configuration menu.
The Data Collection pane displays. On the Data Collection pane, you can select
the datapoints to be set in trend and you can remove datapoints from trend
setting. Here all datapoints of the site are available for selection by using the
scroll buttons at the bottom. The datapoints are shown with their sources such
as Device, Plant, and Segment.
2. Click on the datapoint(s) you want to set in trend.