HP 3000CP - Manual (Page 10)

Table of Contents
viii
To Recalibrate the Printer 8-6
To Restore the Factory’s Calibration 8-7
Changing the Graphics Language 8-8
To Change the Graphics Language Setting 8-8
Graphics Language and Networks 8-9
Changing the Interface Settings 8-10
To Change the I/O Time-out Setting 8-10
Upgrading Your Printer with More Memory 8-11
Turning on the Take Up Reel 8-12
Improving Throughput in the HP DesignJet 3500CP printer 8-14
Controlling Image Quality 9-1
Selecting the Ink Emulation Mode 9-2
Calibrating the Color Output 9-3
Comparing Color Output between Imaging and UV Ink Sysytems 9-3
Performing a Image Quality Test 9-4
Servicing the Printheads 9-5
Aligning Printheads 9-5
Refilling Printheads 9-5
Checking Printheads 9-6
Media Test Print 9-8
How to perform the Media Test Print 9-9
Changing the Print Mode when Media is Already Loaded 9-11
Maintaining Your Printer 10-1
Cleaning the Printer 10-2
Cleaning the Printer Exterior and Inside the Doors 10-2
Lens Maintenance 10-3
Replacing the Lens Cover 10-4
What to Do Next 10-5
Normal Printer Use 10-6
Storing and Moving Your Printer 10-7
Selecting Transport Mode 10-7
Removing the Printheads 10-8
Removing the Printhead Cleaners 10-9
Removing the Ink Cartridges 10-11
Switching off and Disconnecting the Printer 10-13