HP 3000CP - Manual (Page 130)

Working with Ink Systems
Removing and Storing Partially Used Ink Systems
4-30
2 Press down lightly on the printhead and pull it toward you, removing it from the
stall.
3 Repeat step 2 for the three remaining color printheads in the HP DesignJet CP Ink
System Storage Container.
4 Pull the lever arm up and towards you. Press down on the printhead cleaner handle
and pull it out of the stall.
5 Repeat step 4 for the three remaining color printheads cleaners in the HP DesignJet
CP Ink System Storage Container.
6 Put the top cover onto the HP DesignJet CP Ink System Storage Container and raise
the two lock-arms to the locked position.
C6240006
C6240005