HP 3000CP - Manual (Page 126)

Working with Ink Systems
Removing and Storing Partially Used Ink Systems
4-26
4 Lift the lever arm and insert the printhead cleaner into the matching color coded slot
in the HP DesignJet CP Ink System Storage Container.
5 Push the lever arm forward so that the printhead cleaner “clicks” into position in the
HP DesignJet CP Ink System Storage Container.
NOTE The movement of the lever arm will push the printhead cleaner into the slot and
then move the printhead cleaner slightly upwards so that it “clicks” into the
stored position.
The lever arms also prevents installing the printheads and printhead cleaners
into the HP DesignJet CP Ink System Storage Container in the wrong sequence.
This will prevent inadvertent damage to the printheads.
6 Repeat steps 4 and 5 for the three remaining color printhead cleaners in the Ink
System.
C6240001
C6240002
Push the lever arm until
the printhead cleaner
“Clicks” into place