HP 3000CP - Manual (Page 127)

Working with Ink Systems
Removing and Storing Partially Used Ink Systems
4-27
7 Insert the printhead into the stall with the color dot that matches the color of the
printhead label.
NOTE Each printhead is color keyed to the correct stall and will not fit in any other
position.
8 Press down lightly and push the printhead away from you (toward the back of the
cradle) until it “clicks” into place.
9 Repeat steps 7 and 8 for the three remaining color printheads in the Ink System.
10 Put the top cover onto the HP DesignJet CP Ink System Storage Container and raise
the two lock-arms to the locked position.
C6240003
C6240004