HP 3000CP - Manual (Page 290)

Front-Panel Messages
Message Explanations and Actions
12-8
Media too small You may have sent a print file that is too large for the media loaded; the print may be
clipped.
Press Cancel if the media is unsuitable, and reload with appropriate media.
Media too small for
calibration
→
The media you loaded for printhead alignment or a printhead check is too small. The
procedure has been cancelled. You may continue printing without calibrating the
printer, but the image quality is not assured.
Press
↓ to continue. If you want to complete the interrupted procedure, reload with
appropriate media (A3-size paper or larger, in landscape orientation) and redo the
procedure:
• Use Image quality / Printhead service / Align now for printhead alignment.
• Use Image quality / Printhead service / Printheads check / Now for a printhead
check.
MIO error
Communication break The flow of data from the computer to the printer stopped prematurely (for example,
the computer may have been shut down before all data was sent).
Press Enter to clear the message from the front panel display.
MIO error handshake You configured the modular interface incorrectly.
Press the Enter key to clear the message from the front panel. Check the handshake
settings in the printer’s front panel, in the hardware configuration, and in your
application software configuration to make sure they are compatible with one
another.
Mispositioned
Reload roll The roll media is mispositioned.
Remove and reload the roll.
Mispositioned
Reload sheet The sheet media is mispositioned.
Remove and reload the sheet.
MISSING INK SYSTEM
Install
→
One or more ink systems are missing.
Press
↓ or the Replace Ink System key to install the ink systems in order to print
with your printer.
Message Explanation and Action