HP 3000CP - Manual (Page 70)

Working with Media
Loading Roll Media
3-18
d Take hold of the edges of the media now extending from the exit slot and pull the
media toward you until taut. Then align the left and right edges of the media, so
that they are flush with the edges of the roll.
e When you have aligned the media lift the lever.
f The printer checks that the media is aligned properly. If the alignment is
successful the front panel displays:
12 Close the roll cover and press the
↓ key.
Impom
Impomui ioitruy
Impomui ioitruy
C4723127
after aligning
C4704131
C4704016
Lift lever
after aligning
Close roll cover
Continue--------->