HP 3000CP User Manual
Page 115
Working with Ink Systems
Replace the Ink System
4-15
4 Insert the printhead into the stall with the color dot that matches the color of the
printhead label. Press down lightly and push the printhead away from you (toward
the back of the cradle) until it snaps into place as shown below.
NOTE:The printhead colors can also be identified by the part numbers on the boxes.
The sequence of the stalls is, from left to right; yellow, cyan, magenta, and black.
5 Repeat steps 2 through 4 for any additional printheads you need to replace.
6 When you have finished replacing the printheads, the front panel displays the
message “Close window to continue”.
7 Close the window. and the front panel will display the message “Open right door to
access head cleaners”.
8 Continue with the next procedure, Removing and Replacing the Printhead Cleaner.
C4704136