HP 3000CP - Manual (Page 7)

Table of Contents
v
Installing the Final Print 3-6
Media Types 3-8
HP Commercial Names of Media Types 3-8
Physical Characteristics of Media Types 3-9
Combinations of Media Type and Print Quality 3-10
Using Coated Paper and Heavy Coated Paper with Productivity Mode 3-11
Handling Your Media 3-12
Loading Roll Media 3-13
Take Up Reel loading 3-20
Unloading Media from the Take Up Reel 3-27
Removing a Roll from the Printer 3-31
Installing a New Roll into the Printer 3-33
Changing the Core Tube on the Take Up Reel 3-36
Loading sheet media 3-40
Unloading Sheet Media 3-43
Compensating for Badly Cut Media 3-44
Adjusting Skew Tolerance 3-44
Drying Time (Take Up Reel =off) 3-45
Drying time (Take Up Reel =on) 3-46
Working with Ink Systems 4-1
About the Ink System 4-2
The HP DesignJet CP Ink Systems 4-2
Main Features of the HP DesignJet CP Ink System 4-2
What is an Ink System? 4-3
How to Identify the HP DesignJet CP Ink System UV Components 4-4
Identifying the Ink System in the Printer 4-4
When Does the Ink System Refill the Printheads? 4-5
Obtaining Optimum Refill Performance using non-HP media. 4-6
Refilling the Printheads from the Front Panel 4-8
How big a print can I make without a refill? 4-8
Monitoring the Ink Level 4-9
When should I Replace an Ink System? 4-10
Removing and Replacing Ink Systems 4-11
Working with multiple Ink Systems 4-12
Handle Ink Systems with Care 4-12