HP 3000CP - Manual (Page 79)

Working with Media
Unloading Media from the Take Up Reel
3-27
Unloading Media from the Take Up Reel
To remove media from the printer see page 3-31, Removing a Roll from the Printer.
To unload roll media from the Take Up Reel perform the following procedure.
NOTE:Before unloading media ensure the ink is dry; see page 3-46, Drying time
(Take Up Reel =on).
1 Press the Form feed and cut button on the front panel.
2 Important: Remove the Media Weight shown below. It may help you to remove
the end-caps first.
C4704024
Form Feed
and Cut Cancel
Remove the Media Weight
C472347