Securing to a table securing to ceiling or wall – Hitachi ULTRAVISION UT32S402 User Manual

Page 10

Advertising
background image

9

SAFETY PRECAUTIONS (continued)

Main Unit Installation

Anti-tumble Measures

Install in a stable location and take safety precautions against overturning.

When installing the main unit, be sure to use the specified mounting units in order to obtain maximum performance

and maintain safety.

Hitachi assumes no responsibility nor liability for personal injuries or property damage caused by use of other

mounting units or improper installation.

With respect to installation instructions, please read each user manual for the respective mounting units: for

Tabletop Setup, Floor Stand Setup, Wall Mounting, and Ceiling Mounting.

If using Wall or Ceiling Mounting units, contact your local dealer and ask for an approved installation specialist to

set up the unit. Never attempt to install it yourself. That could cause injury or damage.

Please leave adequate space around the unit in order to avoid increasing the internal temperature. Make sure not

to block any ventilation holes.

Do not install the units in a small space such as inside a cabinet, closet or box without adequate ventilation.

For Monitor.-Leave at least 10cm (4") of clearance from each side and 30cm (1') from the top of the Monitor to ceiling.

For A/V center.-Leave at least 10cm (4") of clearance from each side and from the top of the A/V Center to ceiling.

Securing to a table

Securing to ceiling or wall

Use the specified mounting unit to secure the set to a ceiling. For Wall Mounting setup please refer to page (

11

).

For Floor Stand setup please refer to page (

12

).

NOTE

For more information regarding mounting of the unit, please contact

800-HITACHI.

Please install the unit in a proper location where it does not expose anyone to the danger of bumping themselves

(for example their hands, head or face, etc) against the edges of the unit and causing personal injury.

1

Remove the plastic rivet.

2

Fasten the fastening strap to a table using

the wood screw provided.

10cm (4”)

or more

10cm (4”)

or more

30cm (1’)

or more

10cm (4”)

or more

10cm (4”)

or more

Wood screw

(4 x 20 screw) : 1 pc.

Plastic rivet

Fastening strap

10 cm.

10 cm.

10 cm.

10 cm.

10 cm.

10 cm.

Advertising