Hitachi ULTRAVISION UT32S402 - Manual (Page 37)

36
ENGLISH
SETUP OPERATION (continued)
Watching Images from A/V Center/Monitor Composite Input
Setting Picture Adjustment (continued)
Selected Items Setup hint
Contrast Mode
Dynamic
It allows you to choose from 3 modes.
Dynamic: Sharpen the gradation to improve the contrast feeling.
Normal : Improve the contrast feeling to reproduce a faithful
gradation.
Linear : Reproduce as faithful gradation as possible.
Normal
Linear
3D Color Management
Off On : It automatically adjusts the suitable tint, color density, and
brightness on images.
Off : Set it off if the image does not look natural.
On
Black Enhancement
Off
Adjusts the black level compensation.
Low
Middle
High
3D Comb Filter
Off
This function is available only if D-sub 15 pin - composite cable is
used on Monitor.
This reduces the dot and color blurring in minute scales so that it
can reproduce purer color.
This is available only when receiving NTSC3.58 composite signal.
Low
Middle
High
Reset
Each item on this menu screen can be restored to the factory
settings by pressing the
OK
button.
Color Temp. Adjust
On
Amplitude
On: When you want to set specific adjustments in each of the 3
Color Temperature modes. You can adjust on the Amplitude
and Cut Off. The settings reflect on the Color Temperature.
Amplitude: Subdue the colors (Red/Green/Blue) on the
brighter parts (-63~0).
Cut Off : Subdue the colors (Red/Green/Blue) on the darker
parts (-31~+31).
Reset (Available when On): Select to restore amplitude and Cut
Off adjustments to default settings by pressing the
OK
button.
Off: Remains as default setting.
Red
Green
Blue
Cut Off
Red
Green
Blue
Reset
Off
Motion Sharpness
Off On : Set to On to reproduce clearly the image with fast movement
Off : Set it off if the image does not look natural or flicker appears.
On