Hitachi ULTRAVISION UT32S402 - Manual (Page 16)

15
QUICK START GUIDE (continued)
Power On...
24
q
Connect the plug into the wall socket after all other connections are completed.
CAUTION
Ensure that both ends of the power cord are easily accessible.
The Main Power Switch is factory set to On (activated), therefore after you connect the plug into the wall
socket, the color of the indicating lamp must turn Green and the Illumination Lamp turns Blue on Monitor and
A/V Center.The image will display on screen.
Once the
Main Power switch is on, you can turn On/
Off by pressing the Power (On/Off) button on the
remote control.
Language Selection
The initial language setting for on-screen displays is English (US).
You can change to your preferred language.
q
Press the button to display Main Menu.
w
Select “Language” using the
◄►
button.
e
Select the language you prefer from the list using the
◄►
button and then
press the
OK
button.
6
Language
ޓޓޓޓޓEnglish
ޓޓޓޓޓEnglish (US)
ޓޓޓޓޓFrançais
ޓޓޓޓޓEspañol
ޓޓޓޓޓDeutsch
ޓޓޓޓޓᣣᧄ⺆
ޓޓޓޓޓޓ૕ਛᢥ
ޓޓޓޓޓ❥㜚ਛᢥ ޓޓޓޓޓ
Select OK Set Return
5
AC
Wall
Socket
Monitor
Rear
Panel
Main Power Switch
(on the underside)
Front
Rear
Illumination Lamp
Indicating Lamp
AC
Wall
Socket
AVC
Rear
Panel