Hitachi ULTRAVISION UT32S402 - Manual (Page 36)

35
SETUP OPERATION (continued)
Watching Images from A/V Center/Monitor Composite Input
1. Connect to external equipment. (See 20 and 23 for details.)
2. Press the button to switch to A/V Center mode.
Press the button to switch to Composite mode(Monitor side).
3. Press the button.
Setting Picture Adjustment
You can adjust the display condition such as color settings.
Select
"Picture" from Menu list.
Selected Items Setup hint
Picture Mode
Dynamic You can make the best selection from 3 modes depending
on the lighting condition and intended use.
Dynamic: Suitable for brighter conditions.
Natural : Suitable for normal lighting conditions.
Cinema : Suitable for watching movies.
Natural
Cinema
Contrast
-31~+31
(+32~+40)
This adjusts the contrast to meet the surrounding
brightness by using the
◄► button.
The maximum value is extended up to [+40] by pressing
the button for more than 2 seconds at [+31]. The
value between [+32] ~ [+40] appears in magenta. This is
the special feature for dark images, so it is recommended
to set the value less than [+31] under normal conditions.
Brightness -31~+31
Adjust brightness according to personal preference by
using the
◄► button.
Color -31~+31
Adjust color according to personal preference by using the
◄►
button.
Sharpness -15~+15
Preferred sharpness can be adjusted by pressing the
button for softer image or the button for sharper image.
Tint -31~+31
Pressing the button enhances red and weakens green,
while pressing the button weakens red and enhances
green. The setup hint is to adjust for realistic skin color.
Color Temperature
Cool
You can select from 3 settings depending on the color
condition using the
◄►
button.
Normal
Warm
Back Light -20~+20 Adjust the brightness of the Back Light for maximum
visibility.
Reset
Each item on this menu screen can be restored to the
factory settings by pressing the
OK button.
Picture
Picture Mode Dynamic
Contrast +31
Brightness –31
Color 0
Sharpness +15
Tint 0
Color Temperature Normal
Back Light +20
Reset Reset
Select OK Set Return
Picture Dynamic
Contrast Mode Normal
3D Color Management Off
Black Enhancement Off
DNR Off
MPEG NR Off
Film Mode Off
3D Comb Filter Off
Reset Reset
Select OK Set Return
Picture Dynamic
Color Temp. Adjust
Motion Sharpness On
Select OK Set Return