Hitachi ULTRAVISION UT32S402 - Manual (Page 35)

34
ENGLISH
SETUP OPERATION (continued)
Main Menu List
Menu Page
Picture
(A/V Center/Monitor
Side Composite)
Picture Mode Select between 3 picture modes according to the lighting condition. 35
Contrast Adjust to increase or decrease the picture contrast. 35
Brightness Adjust to brighten or darken the picture. 35
Color Adjust to increase or decrease the color density. 35
Sharpness Adjust to sharpen or soften the picture. 35
Tint Adjust to obtain natural skin color. 35
Color Temperature Select between 3 settings according to your preferred color tone. 35
Back Light Adjust to increase or decrease the brightness of back light on LCD panel. 35
Reset Reset each item on the menu screen to the factory setting. 35
Contrast Mode Select between 3 contrast modes to suit your preference. 36
3D Color Management Adjust the suitable tint, color density, and brightness on image. 36
Black Enhancement Adjust the black level compensation. 36
DNR Reduce noise for picture signal. 37
MPEG NR Reduce mosquito noise in the picture. 37
Film Mode Adjust to make the moving image smooth. 38
3D Comb Filter Reduce the color blurring to reproduce purer color. 36
Reset Reset each item on the menu screen to the factory setting. 36
Color Temp. Adjust Set specific adjustment in each of 3 color temperature modes. 36
Motion Sharpness Set to On to reproduce clearly the image with fast movement 36
Picture(RGB)
Contrast Adjust to increase or decrease the picture contast. 40
Brightness Adjust to brighten or darken the picture. 40
Color Adjust to increase or decrease the color density. 40
Tint Adjust to obtain natural skin color. 40
Color Temperature Select between 3 settings according to your preferred color tone. 40
Color Temp. Adjust Set specific adjustment in each of 3 color temperature modes. 40
Back Light Adjust to increase or decrease the brightness of back light on LCD panel. 40
Reset Reset each item on the menu screen to the factory setting. 40
Audio
Treble Adjust to increase or decrease the level of treble. (-15~+15) -
Bass Adjust to increase or decrease the level of bass. (-15~+15) -
Balance Adjust the balance of sound from the bottom right and left speakers. (-10~+10) -
Surround Select surround-sound. (Off/On) -
Bass Boost Enhance bass sounds. (Off/On) -
Clear Voice Select clearer and more realistic sounds. (Off/On) -
Perfect Volume Adjust sound volume appropriately. (Off/On) -
Speakers Select if using internal speakers. (Off/On) -
Reset Reset each item on the menu screen to the factory setting. -
Function
System This function is not available. -
HDMI Control
Auto Input Change
In response to the connected equipment such as DVD(in case the A/V Center is not
connected) through HDMI cable, the monitor is automatically turned On and switched
to HDMI input.
-
System Standby
In response to the monitor, the connected equipment such as DVD (in case A/V Center
is not connected) through HDMI cable is automatically turned Off (standby mode).
-
AV Center Control Selecting On will activate AV Center OSD interface. 33
Setup
(A/V Center/Monitor
Side Composite)
Video Power Save Save power consumption when no signal can be input in HDMI/Composite input mode. 44
RGB Input Select the effective signal. 39
Color System This function is not available. -
Setup(RGB)
Auto Adjust
Adjust Horizontal Position, Vertical Position, Horizontal Clock, and Clock Phase
automatically.
41
Horizontal Position Adjust the display position horizontally. 41
Vertical Position Adjust the display position vertically. 41
Horizontal Clock Minimize the vertical stripes on the screen. 41
Clock Phase Minimize the blurring of the letters and stripes on horizontal row. 41
Reset Reset each item on the menu screen to the factory setting. 41
Frequency Display
Set On for PC signal frequency information to be displayed on the Input Signal Screen
Display.
41
WXGA Mode Select the resolution when WXGA signal is received. 41
RGB Input Select the effective signal. 41
Language 33
AV Center(if activated) - For A/V Center OSD description please refer to A/V Center Instruction Book(Included)
NOTE
The picture settings can be stored for each of inputs except “Picture Mode”.