Hitachi ULTRAVISION UT32S402 - Manual (Page 26)

25
BASIC OPERATION (continued)
Volume Up/Down
1. To increase the sound volume, press the Volume Up button
on the remote control or control panel.
The Volume Indicator value on the screen will shift to the right.
2. To decrease the sound volume, press the Volume Down button
on the remote control or control panel.
The Volume Indicator value on the screen will shift to the left.
Mute
1. To mute sounds, press the button on the remote control.
The sound of the unit is temporarily turned Off.
The color of the Volume Indicator will turn into grey
while muting the volume.
2. To turn the sound back on, press the button again, or
press the Volume Up button on either the remote control or
control panel.
The color of the Volume Indicator will turn back to blue.
NOTE
You can decrease the volume by pressing the Volume Down
button while the sound is muted.
Channel Selector/Favorite Channel
The CHANNEL SELECTOR buttons are used to select channels, lock
access code, etc. Use the CHANNEL SELECTOR buttons to enter one,
two, or three numbers to select channels. Enter 0 first for channels
1 to 9, or simply press the single digit channel you wish to tune then
press the OK button for the TV to tune. Channel selection may also be
performed by CHANNEL (CH) UP ( ) or CHANNEL (CH) DOWN ( ).
Press the FAV CH button to switch to Favorite(FAV) channel mode. You
will know you are in Favorite Channel mode when (FAV) is displayed
and the displayed channel is GREEN. Press it again to return to your
regular tuned channels. You can add or delete any channel to your
Favorite channel list by pressing FAV CH button on A/V Center/Setup/
Channel List menu.
Volume Up/Down button
Volume Up/Down
button
Mute button
20
Press the SELECT button to set the option.