Hitachi ULTRAVISION UT32S402 - Manual (Page 24)

23
CONNECTION (continued)
3. Connecting to Equipment Having Video Output
Terminals ( on Monitor side)
The Monitor can be connected to equipments having video output using the optional D-sub 15 pin - composite cable.
Your UT Monitor is capable to receive composite video, you can watch images from your external equipments
through the optional D-sub 15 pin - composite cable, but A/V Center provides more practical terminals.
CAUTION
Use only the power cord provided.
Do not use a power supply voltage other than that indicated (AC120, 60Hz). It may cause fire or electric shock.
For the LCD monitor, a three-core power cord with a ground terminal is used for efficiency protection. Always be sure
to connect the power cord to a three-pin grounded outlet and make sure that the cord is properly grounded. If you use
a power source converter plug, use an outlet with a ground terminal and screw down the ground line.
Ensure that both ends of the power cord are easily accessible.
If you have to change the power cord, please use a certified power cord that meets your region’s safety standards.
AC
Wall
Socket
Monitor
Rear
Panel
AC
Wall
Socket
AVC
Rear
Panel
4. Connect the Power Plugs into the Wall Socket
Monitor Back Side A/V Center Back Side
VCR
DVD player
Home video game system
Camcorder
Set-Top Box
AUDIO
(Audio)
(D-sub 15 Pin)
or
*
* Optional D-sub 15 pin - composite
cable.
[Example] IN OUT