Hitachi ULTRAVISION UT32S402 - Manual (Page 51)

50
ENGLISH
PRODUCT SPECIFICATIONS (continued)
Recommended Signal List
With HDMI input(Monitor Side Only, for A/V Center Check A/V Center IB)
No.
Signal mode Horizontal
frequency
(kHz)
Dot clock
frequency
(MHz)
Remarks Signal
Name
Resolution
Vertical
frequency (Hz)
1 VGA 640 X 480 59.94 31.47 25.18 CEA-861D
2 480i 720(1440) X 480 59.94 15.73 27.00 CEA-861D
3 480p 720 X 480 59.94 31.47 27.00 CEA-861D
4 1080i/60 1920 X 1080 60.00 33.75 74.25 CEA-861D
5 720p/60 1280 X 720 60.00 45.00 74.25 CEA-861D
6 1080p/60 1920 X 1080 60.00 67.50 148.50 CEA-861D
7 1080p/24 1920 X 1080 24.00 27.00 74.25 CEA-861D
With RGB input
Timing Name
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Frequency
(MHz)
Sync
Polarity
(H/V)
Remarks
640 x 400 @ 70Hz 31.469 70.086 25.175 - / + VGA
640 x 480 @ 60Hz 31.469 59.940 25.175 - / - VGA
800 x 600 @ 60Hz 37.879 60.317 40.000 + / + VESA
1024 x 768 @ 60Hz 48.363 60.004 65.000 - / - VESA
1280 x 768 @ 60Hz 47.776 59.870 79.500 - / + VESA / WXGA Mode : 1280x768
1360 x 768 @ 60Hz 47.712 60.015 85.500 + / + VESA / WXGA Mode : 1360x768
The type of video board or the connecting cable used may not allow for correct displays adjustment of Horizontal
Position, Vertical Position, Horizontal Clock and Clock Phase.
The unit differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and
vertical sync signal polarities. Note that different signals having all these elements alike may be handled as the
same signal.