Functions (continued) power save mode – Hitachi ULTRAVISION UT32S402 User Manual
Page 45
44
ENGLISH
FUNCTIONS (continued)
Power Save Mode
When Monitor Composite Input is Selected
You are provided the function to save power consumption when no signal is
detected in the Monitor Composite input. Set to On in
“Video Power Save” from
the Setup Menu, which leads to the power save mode.
1. Press the
button when in Monitor Composite mode.
2. Select the “Setup” menu and press the
OK
button.
3. Select “Video Power Save”.
Video Power Save
Off
On
When no signal is detected
When signal is input during
On in “Video Power Save”
Condition
Indicating Lamp
Power Save
Orange
Turns On automatically.
When RGB Input is Selected
When the unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set to
be activated automatically when the computer is not being used, in order to reduce the power consumption of the
unit.
RGB sync signal
Horizontal
Yes
No
Yes
No
Vertical
Yes
Yes
No
No
PC signal
Active (normal display)
Blank (no display)
Operation mode
On
Off
Indicating lamp
Lights green
Lights orange
To return to operating status, operate the personal computer, or press either the
Input Select button on the control
panel or the
or
button on the remote control.
Setup
Video Power Save
Off
RGB Input
RGB
Color System
Auto
Select On/Off Return