Hitachi ULTRAVISION UT32S402 - Manual (Page 18)

17
COMPONENT NAMES(continued)
Audio Video Center
Front Panel
Rear Panel
q
Cabinet
w
Indicating Lamp
e
Power Off/On button
*Please refer to 20 ~ 23 for detailed information
regarding the connections.
q
w
e
t
q
Antenna Input
To switch between Cable and Air input, go to the
Channel Manager option to change the signal source
CABLE or AIR.
w
Audio/Video inputs 1 and 2 (Composite)
INPUT-1 and 2 provide composite Video jacks for
connecting equipment with this capability, such as a
DVD player, Game Console or Camcorders.
e
Audio/Video inputs 3 and 4 (Y-P
B
P
R
Components)
INPUTS 3 and 4 provide Y-P
B
P
R
and Audio jacks for
connecting equipment with this capability, such as a
DVD player or Satellite Receiver.
r
USB Port(For S/W Upgrade only)
This slot is for future software upgrades. Hitachi will
notify you if a software upgrade is required for your
A/V Center. In order to receive written notification,
please complete and return your warranty card.
t
HDMI Inputs1 and 3, HDMI 2/DVI Input
Use the HDMI input for your external devices such as
Satellite Receiver or DVD players equipped with an
HDMI output to assure that pristine high-definition im-
ages retain the highest video quality from the source
all the way to your monitor screen.
y
Optical Output
This jack provides Digital Audio Output for your audio
device that is Dolby® Digital and PCM compatible,
such as an audio amplifier.
u
HDMI Output(To UT Monitor)
The A/V Center HDMI output terminal (AV Out)
is connected to the UT Monitor. Only one cable is
used to transmit all video/audio/control signals, thus
facilitating an easy connection. Moreover, the digital
signals can produce high quality data without any
degradation.
w
q e
e
r y u
NOTE
Your component outputs may be labeled Y, B-Y, and
R-Y. In this case, connect the components B-Y out-
put to the P
B
input and the components R-Y output to
the P R input.
Your component outputs may be labeled Y-CBCR. In
this case, connect the component CB output to the P
B
input and the component CR output to the P
R
input.
It may be necessary to adjust TINT to obtain opti-
mum picture quality when using the Y-PBPR inputs .
NOTE
*Manufactured under license from Dolby Labora-
tories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
NOTE
The HDMI input is not intended for use with personal
computers.
Only DTV formats such as 1080p, 1080i, 720p, 480i
and 480p are available for HDMI input..