Furuno GP-1600F - Manual (Page 10)

1 – 2
1.2 Control Description
All operations of the GP-1600F are carried out with the controls
on the front panel of the display unit. All controls respond immedi-
ately to your command and the unit emits a beep to signify it has
accepted your command. (Invalid key input emits several beeps.)
NU/CU
ENT
MENU
ESC
PLTR
6
SNDR
1
EVENT
MOB 7
GOTO
8
AUTO
2
WPT
3
ZOOM
IN 4
ZOOM
OUT 9
CNTR
5
CURS
0
TONE
CLR
POWER
Arrow keys
Shifts cursor, picture, VRM;
select items on menu.
Selects presentation
mode: north-up or
course-up.
Selects plotter display.
Enters marks, event
marks and MOB mark.
Sets/cancels destination.
Zooms out plotter display.
Turns cursor on/off.
Erases marks, waypoints;
silences aural alarm.
Turns power on/off.
Displays main menu;
escapes current operation.
Selects video
sounder display.
Turns on automatic
adjustment of video
sounder picture.
Enters waypoints.
Zooms in plotter
display.
Centers cursor and
own ship's position.
Enables adjustment of LCD
tone and brilliance;
changes position co-ordinate.
Figure 1-2 Front panel controls
1.3 Inserting Chart Cards
Note: Turn the power off before inserting a chart card. This en-
ables automatic loading of chart.
1) Open the memory card slot cover by unfastening two screws.
2) Insert the chart card label side up, arrow forward.