Furuno GP-1600F - Manual (Page 42)

2 – 18
2.13 Following a Route
Following a route is the process by which you use a registered
route for navigation. Your displays navigation information to guide
you from one waypoint to the next, as it automatically switches
from one waypoint to another in sequence.
1) Press the [GOTO] key.
2) Press the [MENU ESC] key.
3) Press the [▼] key to select ROUTE List.
4) Press the [NU/CU ENT] key. The route list appears.
5) Press the [▼] or [▲] key to select route which you want to
follow.
6) If you want to navigate the waypoints of the route in the order
reverse of which they were entered, press the [ ] key. Direc-
tion selected appears at the top of the display.
7) Press the [NU/CU ENT] key. An asterisk appears to the left of
route selected.
Route appearance on the display
• A dashed line connects all waypoints including own ship’s po-
sition.
• Range and the bearing to the first waypoint appear at the bot-
tom of the display.
WP001 120° 223.8nm
CSE 180° SPD 16.8kt 3D
DEP 113.6 ft TMP 16.0°C 12.0V
POS 34°26.345'N 135°41.232'E
01
00
20
05
Figure 2-22 Appearance of waypoint-created route selected for
navigation