Furuno GP-1600F - Manual (Page 34)

2 – 10
4) Press the [▲] or [▼] key to select vacant waypoint number.
5) Press the [NU/CU ENT] key. The editor display appears.
Edit = Waypoint: 010
34° 43.216 'N 135° 21.678'W
MARK: _ _
CMNT: PORT
:Cursor :Column
ENT:Enter :N/S,E/W
ESC:Escape
Figure 2-12 Waypoint editor display
6) Enter latitude and longitude. (For South latitude or East longi-
tude, press the [TONE] key before entering latitude or longi-
tude.)
7) Press [▼] key to select a mark shape and enter a comment as
explained in "Entering waypoints by the cursor," or press the
[NU/CU ENT] key to enter waypoint and escape.
Entering waypoints by event position
1) Press the [WPT] key.
2) Press the [▼] key to select Event to WPT.
3) Press the [NU/CU ENT] key. The event list appears.
4) Press the [▲] or [▼] key to select event position to enter as a
waypoint.
5) Press the [NU/CU ENT] key.
6) Change waypoint number, select waypoint mark and enter com-
ment, or press the [NU/CU ENT] key to save waypoint under
waypoint number shown, date and standard waypoint mark.
7) Press the [MENU ESC] key twice to escape.