Furuno GP-1600F - Manual (Page 71)

5 – 3
6) Select LC or DC.
7) Press the [▼] key to select Chain:Sec.
8) Enter Loran (or Decca) data with the numeral keys.
9) To apply an offset to the LOPs, select LOP CALIB and enter
offset.
10) Press the [NU/CU ENT] key.
11) Enter next offset and press the [NU/CU ENT] key.
12) Press the [MENU ESC] key.
5.4 DISPLAY SETUP Menu
The DISPLAY SETUP menu lets you set the size and tone of vari-
ous markers.
Keying sequence: [MENU ESC] [1]
Figure 5-4 DISPLAY SETUP menu
DISPLAY SETUP menu description
LAND PATTERN: Select land display tone.
PLACE NAME: Set place name tone for bright, dim or off.
GRID: Set grid tone for bright, dim or off.
COURSE BAR: Set course bar tone for bright, dim or off.
TIME MARK: Set time mark tone for bright, dim or off.
WPT MARK SIZE: Select size of waypoint mark to large or small.
"S" displays all waypoints by an "x." (Waypoint number does not
appear.)
CURSOR SIZE: Select size of cursor to large or small.
DISPLAY SETUP
LAND PATTERN 1 2 3 OFF
PLACE NAME BRT DIM OFF
GRID BRT DIM OFF
COURSE BAR BRT DIM OFF
TIME MARK BRT DIM OFF
WPT MARK SIZE L S
CURSOR SIZE L S
SECTOR INFO ON OFF
LIGHTS FLASH ON OFF
:Cursor ESC:Esc