Furuno GP-1600F - Manual (Page 67)

4 – 2
Water temperature alarm
The water temperature alarm sounds when the water temperature
is within (or over) the preset temperature range. This alarm is use-
ful for searching for specific species of fish, since each species of
fish has its own habitable water temperature. (This alarm requires
connection of a water temperature sensor.)
Trip alarm
The trip alarm sounds when distance travelled exceeds the trip alarm
setting.
Fish alarm
The fish alarm sounds when a fish school is detected within the
selected range.
Bottom alarm
The bottom alarm sounds when the seabed depth is narrower than
the alarm range set.
4.2 Enabling/Disabling the Alarms
Enabling the alarms
1) Press the [MENU ESC] key.
2) Press the [5] key to select ALARM SETUP.
ALARM SETUP 1/2
ARRIVAL ARRIVAL ANCHOR OFF
Range 00.500nm
XTE ON
OFF
Range 00.250nm
SPEED WITHIN OVER
OFF
Speed 11.0 ~ 15.0kt
TEMP WITHIN OVER
OFF
Temp +11.0 ~ 15.0°C
TRIP ON
OFF
Range 005.00nm
▲▼ :Cursor :+/-
CLR:TRIP RESET ESC:Esc
ALARM SETUP 2/2
FISH ON OFF
Range 011.0 ~ 015.0 ft
BOTTOM ON
OFF
Range 011.0 ~ 015.0 ft
▲▼ :Cursor
ESC:Esc
Figure 4-3 ALARM SETUP menus
3) Operate the [Arrow] keys to select alarm desired. (To go to
page 2 of the menu, press the [▼] key several times.
4) Enter alarm range.