Furuno GP-1600F - Manual (Page 45)

2 – 21
Entering marks
To enter a mark at ship's position;
1) Press the [CURS] key to turn off the cursor.
2) Press the [EVENT MOB] key. A mark is placed at ship's posi-
tion.
To enter a mark at cursor location;
1) Press the [CURS] key to turn on the cursor.
2) Press the [EVENT MOB] key. A mark is placed at cursor loca-
tion.
The mark currently selected on the TRACK/MARK SETUP menu
appears at the cursor location (or current ship's position).
2.18 Changing Mark Attributes
Changing mark size
You may change the size of marks to small or large.
1) Press the [MENU ESC] key. The main menu appears.
2) Press the [2] key to select TRACK/MARK SETUP.
TRACK/MARK SETUP
EVENT SHAPE
MARK SHAPE
LINE TYPE
MARK
BRT DIM
MARK SIZE L S
PLOT ON OFF
PLOT INTVL TIME DIST AUTO
00° 10 00.10nm
:Cursor ESC:Esc
Figure 2-24 TRACK/MARK SETUP menu
3) Press the [▼] or [▲] keys to select MARK SIZE.
4) Press the [ t] or [s] key to select L or S.
5) Press the [MENU ESC] key.