Furuno GP-1600F - Manual (Page 97)

Index – 3
S
Scale/range 5-4
Scrolling the display 2-6
Self tests
memory, I/O port 6-2
panel 6-3
self test menu 6-2
test pattern 6-4
SENSOR SETUP menu description 5-7
Smoothing 5-4
SOUNDER SETUP menu 3-15
SPD sensor selection 5-7
Specifications A-1
Speed alarm 4-1
Speed averaging 5-5
Speed calibration 5-7
System configuration 1-1
T
Temperature alarm 4-2
Temperature calibration 5-7
Temperature graph 3-11
Temperature sensor selection 5-7
Temperature unit 5-6
Test pattern 6-4
Time mark tone 5-3
Tone
chart features 5-3
LCD 1-4
Track
erasing all 2-26
plotting interval 2-26
stopping plotting of 2-25
Transmission frequency 3-2
Trial speed 2-17
Trip alarm 4-2
Troubleshooting 6-6
True bearing 5-6
TVG 3-15
U
Unit of measurement 5-6
UNIT SETUP menu 5-6
V
Variable Range Marker. See VRM
Video sounder
automatic operation 3-6
bottom-lock range 3-15
bright echo 3-12
correcting water temperature readout 3-14
depth change by aural alarm 3-10
echo sensitivity 3-15
gain adjustment 3-7
manual operation 3-7
noise suppression 3-8
picture advance speed 3-9
principle of operation 3-1
selecting displays 3-5
stopping 3-15
suppressing interference 3-10
temperature graph 3-11
TVG 3-15
zoom ratio 3-12
VRM 3-13
W
Waypoints
cancelling destination waypoint 2-14
changing data 2-10
entering at own ship's position 2-9
entering by event position 2-10
entering by the cursor 2-7
entering through waypoint list 2-9
erasing by the cursor 2-12
erasing through waypoint list 2-12
mark size 5-3
setting destination waypoint 2-12
World time standards A-3
X
XTE alarm 4-1
Z
ZOOM IN/ZOOM OUT key 1-4
Zoom ratio 3-12