Furuno GP-1600F - Manual (Page 49)

2 – 25
The MOB mark appears at own ship's position along with a flag.
The MOB position is automatically selected as destination and the
range and bearing from own ship's to the MOB position are dis-
played.
EVENT
MOB
Man Overboard
Range +
bearing
Current
position
Press over 3 seconds
when someone falls overboard.
WP
MOB 120° 0.8nm
CSE 180° SPD 16.8kt 3D
DEP 113.6 ft TMP 16.0°C 12.0V
POS 34°26.345'N 135°41.232'E
M
00
MOB mark
Range and bearing
to MOB position
Figure 2-26 The MOB function
Canceling MOB position as destination
1) Press the [GOTO] key.
2) Press the [CLR] key. The confirmation window appears.
3) Press the [NU/CU ENT] key.
Note: To erase the MOB mark, clear the memory. For further de-
tails, see page 6-10.
2.26 Stopping Plotting of Track
When your boat is at anchor or returning to port you probably won’t
need to record its track. You can stop recording the track, to con-
serve the track memory, as follows:
1) Press the [MENU ESC] key.
2) Press the [2] key to select TRACK/MARK SETUP. The track/
mark setup window appears.
3) Operate the [Arrow] keys to select PLOT.
4) Press the [ s] key to select OFF.
5) Press the [MENU ESC] key to close the menu.
"H" appears on the screen, and own ship mark becomes hollow.
(Note that "H" does not appear on the navigation display.) To re-
sume recording, turn on "PLOT" at step 4 in the above procedure.