Furuno GP-1600F - Manual (Page 70)

5 – 2
GPS SETUP
GPS SMOOTHING
Posn 000 (000 ~ 999)
Spd 000 (000 ~ 999)
GEODETIC
WGS-84 OTHER(002)
POS CALIB 00.000'N 00.000'E
UNHEALTH RSTR
DISABLED (03)
TIME DIFF +00:00
▼▲ :Cursor :N/S,E/W,+/-
ENT:Enter ESC:Esc
Figure 5-2 GPS SETUP menu
5) Enter correction value with numeral keys.
6) Press the [NU/CU ENT] key.
7) Press the [MENU ESC] key.
L/L appears on the display. To remove the correction, enter zeroes
at step 4 in the above the procedure and press the [NU/CU ENT]
and [MENU ESC] keys.
5.3 Displaying Loran C or Decca LOPs
Ship’s position can be displayed in latitude and longitude, Loran C
LOPs or Decca LOPs. To display position in Loran C or Decca
LOPs, do the following:
1) Press the [MENU ESC] key.
2) Press the [0] key to select the SYSTEM menu.
3) Press the [2] key to select PLTR SETUP.
PLTR SETUP
NAVAID OWN LC DC ALL
SCALE SCALE RANGE
SMOOTHING 00 (00~15)
SPD AVERAG 00 min
BEARING TRUE
MAG
MAG CALIB AUTO MAN
06.9° W 00.0° E
EVNT METHOD
EVENT MARK
POSITION L/L LOP
DISP LC DC
Chain:Sec 7970:11-26
LOP CALIB +000.0
µ
s
+000.0
µ
s
:E/W
▼▲ :Cursor ESC:Esc
Figure 5-3 PLTR SETUP menu
4) Operating the [Arrow] keys, select LOP at the Position line.
5) Operate the [Arrow] keys to select DISP.