Furuno GP-1600F - Manual (Page 39)

2 – 15
Entering routes by cursor
1) Press the [GOTO] key.
The destination waypoint menu appears.
SELECT GOTO MODE
▲
WPT List
EVENT List
ROUTE List
▼ Cursor/Route Plan
CLR: Release
ENT:Sel ESC:Cancel
Figure 2-18 Display for selection of destination
2) Press the [▼] key to select Curosr/Route Plan.
3) Press the [NU/CU ENT] key.
4) Operate the [Arrow] keys to place the cursor on location for
destination waypoint.
5) Press the [NU/CU ENT] key. To clear entry, press the [CLR]
key.
6) Repeat steps 4 and 5 to complete the route.
Note: Any route waypoints you enter here will also be entered
on the waypoint list.
7) Press the [NU/CU ENT] key.
8) Select route number.
If you do not want to store the route permanently, press the
[MENU ESC] key to escape.
9) Press the [NU/CU ENT] key.
A dashed line connects all waypoints including own ship’s posi-
tion. The range and bearing to the first waypoint appear at the bot-
tom of the display.