Fluke 1529 Chub-E4 - Manual (Page 66)

bered. Select ALL DATA to delete all demand log readings or select a specific
label to delete only the demand log data for that label.
Use the LR buttons to select the label of the data you want to delete. Press
the Enter button to continue and delete the data. Press the Exit button to can-
cel and return to the DEMAND LOG menu.
7.4.2 Auto Log
The AUTO LOG function allows measurements to be logged automatically in
user-selectable intervals. Readings are stored to the instrument's memory and
assigned a label for easy recall and organization of data. The instruments mem-
ory can store up to 8,160 auto log readings.
Auto log values are stored exactly as they appear on the upper portion of the
display. The resolution, units, and the channels displayed should be set up prior
to auto logging in order to ensure proper storage of data. All displayed chan-
nels are stored during an auto log session. If the upper portion of the display is
changed while data is being auto logged, the data collected is modified from
the time the display was changed. For example, if a channel is disabled while
auto logging, that channel stops being stored from the time it was disabled.
When this function is selected, the bottom portion of the display shows the
1529 Chub-E4 Thermometer Readout
User’s Guide
60
1
24.159C
3
24.142C
2
24.634C
4
24.015C
DELETE: ALL DATA
EXIT ENTER / MENU UNIT CONTRAST
1529 CHUB E-4 THERMOMETER READOUT
Figure 31 Delete Data