Meridian Audio M3900 - Manual (Page 160)

Page 160 of 174 Appendix A: Flash Download procedure
553-3001-216 Standard 5.00 January 2002
STAT the hardware
1 Load LD 137 and get the status of the hard disks.
Note: Be sure the hard disks are synchronized. If not, synchronize
before proceeding.
LD 137
STAT
Get the status of the hard disks
TEST CMDU Performs hard and floppy disk test.
****
exit program
2 Load LD 135 and get the status of the CPs, CNIs, and memories.
LD 135
STAT CPU Get the status of both CPs and memory
STAT CNI Get the status of all configured CNIs
Check that Core 0 is active
1 Be sure Core 0 is active. If Core 1 is active, make Core 0 active:
LD 135
STAT CPUGet status of the CPOS
SCPU
Switch to Core 0 (if necessary)
**** exit program
Split the Cores
1 From the active side, split the cores:
LD 135
SPLIT Enter Split on the active core
Allow the former active side to INIT before continuing
****
exit program
The system is now in split mode.