Meridian Audio M3900 - Manual (Page 60)

Page 60 of 174 Configure the M3900 Series Meridian Digital Telephone
553-3001-216 Standard 5.00 January 2002
Task summary list
The followingis a summary of the tasks in this section:
5 LD 15 - Assign a default language and customize set-to-set messages.
6 LD 15 - Enable Virtual Office Automatic Logout and configure the
automatic logout time for Virtual Office terminals.
7 LD 11 - Configure the Callers List and Redial List keys on
Context-Sensitive Soft Keys or a Programmable feature keys.
8 LD 11 - Configure the default language for the M3900 set.
9 LD 11 - Allow or deny the erasingof the Callers and Redial lists for
virtual terminals.
KEY xx aaa yyyy
zzz
Telephone function key assignments where:
xx = key number.
aaa = key name or function.
yyyy, zzz = additional information required.
Refer to the Key description table for each M3900 telephone:
“M3901 key description” on page 74.
“M3902 key description” on page 76.
“M3903 key description” on page 77.
“M3904 key description” on page 80.
“M3905 key description” on page 83.
MTAD (Meridian 1 Time and Date) - The system puts a block on the
time/date key on all the M3900 Series Meridian Digital Telephones.
Note 1: VTN primary DN cannot be a primary DN for any other TN, and the
VTN must be defined as a MARP TN.
Note 2: The DN of a Virtual Terminal cannot be defined on a Host Terminal,
and the Host Terminal DN cannot be defined on a Virtual Terminal.
... ... ...
LD 11 – Configure the M3900 Series Digital Telephone (Part 4 of 4)
Prompt Response Description