Meridian Audio M3900 - Manual (Page 59)

Configure the M3900 Series Meridian Digital Telephone Page 59 of 174
M3900 Series Meridian Digital Telephones Description, Installation and Administration
CLS aaaa Class of Service options where aaaa:
= (GRLD) Group Listening Denied, (M3902, M3903, M3904).
= GRLA Group Listening Allowed, (M3902, M3903, M3904).
= (HFD) Handsfree Denied,M3902, M3903, M3904).
= HFA Handsfree Allowed (M3902, M3903, M3904).
= ADD Automatic Digit Display, default for M3902, M3903, M3904,
M3905.
= (VCE) Voice Terminal, required if ATA equipped.
= DTA Data Terminal.
= (FLXD) Flexible voice/data denied.
= FLXA Flexible voice/data allowed, required if ATA equipped.
= (STSD) Set-to-Set Messaging Denied, (M3903, M3904, and
M3905).
= STSA Set-to-Set messaging Allowed, (M3903,M3904, and M3905).
= (CRPD) Corporate Directory Denied, (M3903, M3904, and M3905).
= CRPA Corporate Directory Allowed.(M3903, M3904, and M3905).
Note 1: If ATA is equipped, CLS = FLXA, VCE required.
Note 2: M3903 and M3904 must have HFA class of service for the Headset to
operate.
... ... ...
DCFW z..z
x
<CR>
Default Call Forward DN.
DN where calls are forwarded (the target DN).
The maximum length of the DCFW is 31.
x = remove the DCFW DN.
Note: The DCFW prompt appears only for Virtual Terminals (3903V, 3904V).
LD 11 – Configure the M3900 Series Digital Telephone (Part 3 of 4)
Prompt Response Description