Meridian Audio M3900 - Manual (Page 17)

Functional description Page 17 of 174
M3900 Series Meridian Digital Telephones Description, Installation and Administration
Table 1 shows FDHF interoperability with other M3900 cartridges.
To initiate Full Duplex Handsfree functionality, follow the existingsteps for
Handsfree operation in the M3901, M3902, M3903, and M3904 User Guide.
System-Initiated Language Selection
With the System-Initiated Language Selection feature, the system
administrator can define a default language on a customer basis for M3902,
M3903, M3904, and M3905 sets. The default language defined by the system
administrator applies to all new M3900 sets configured for the customer
group.
When the system administrator configures a new M3900 set, the default
language is sent to the set as part of the key map download. If necessary, the
system administrator can override the system default.
Note: If the system administrator overrides the system default, it only
affects the language on the set; it does not affect the system default.
If the user changes the default language for their set, the new language
selection is uploaded to the Meridian 1 system. The new language selection
overrides the language configured for the Terminal Number (TN).
This functionality allows Virtual Office workers to store their language
selection on the Meridian 1 system. When the virtual worker logs in to a host
set, the language selection changes to the language defined for the virtual
worker.
Table 1
FDHF Interoperability
External
Alerter and
Recording
Interface
CTIA ATA PC Utility
FDHF YES
See Note below YES NO YES
Note: FDHF works with the External Alerter and Recording Interface functionality; however,
FDHF does not work with the External Alerter and Recording Interface when a recording
device is connected.