Furuno GP-3500 - Manual (Page 11)

1-1
1. BASIC OPERATION
1.1 Controls Description
1.1.1 Display unit
When you correctly execute an operation, the unit generates a beep. Invalid
operation causes the unit to emit three beeps.
Turns power on/off.
Sets/releases the destination.
Card slot
Opens the BRILLIANCE
window.
Opens the SAVE WPT window.
Displays the DISPLAY MODE
screen.
Enlarges/shrinks display.
ENTER knob
Push: Registers numeric data
or operation.
Rotate: Selects menu items.
• Silences the alarm.
• Erases marks and waypoints.
• Clears alpnanumeric data.
• Enters numeric data.
• Enters mark.
• Selects menu item.
Mesures the bearing and range
between two points.
Opens the CHANGE SHIP'S
TRACK COLOR window.
Shows the VRM.
Changes the track plotting method
and plotting interval.
Opens the CHANGE MARK
COLOR window.
• Displays/erases the cursor.
• Switches + to - and vice vevsa.
• Switches N to S, E to W and
vice vevsa.
Moves own ship's position
or cursor position to center.
Trackball
• Moves the cursor.
• Selects the menu item.
POWER BRILL
SAVE
MOB
WPT GOTO
DISP
ZOOM
IN
ZOOM
OUT
PROG1 MENU
T D
5
7 8 9
0
MARK
COLOR
CURSOR
ON/OFF
VRM
TRACK
COLOR
CENTER
PLOT
INTVL
CLEAR
6 4
1 3 2
PROG4 PROG3 PROG2 Executes program assigned.
Momentary press: Registers
own ship's
positions.
Marks man
overboard
position. Long press:
(more than
3 seconds)
Control panel