4 internal memory – Furuno GP-3500 User Manual
Page 161
10. RECORDING & PLAYING BACK DATA
10-11
10.4 Internal
Memory
Your unit has five internal memories in which to store data. Data are saved and
replayed between the working memory and internal memory.
10.4.1
Saving data to internal memory
Data in the working memory can be saved in internal memories. The total
number of points for tracks, marks and lines is 16,000.
1. Press the [MENU] key to show the main menu.
2. Press the [3] key to show the MEMEMORY CARD IOERATIONS & DATA
TRANSFER menu.
3. Press the [8] key to show the OPERATE INTERNAL MEMORY.
3-8. OPERATE INTERNAL MEMORY
SHIP'S TRACKS & MARKS
1. YES
2. NO
WAYPOINTS & ROUTES
1. YES
2. NO
SETTING DATA
1. YES
2. NO
SAVE TO INTERNAL MEMORY
BLOCK-1
1. YES
2. NO
BLOCK-2
1. YES
2. NO
BLOCK-3
1. YES
2. NO
BLOCK-4
1. YES
2. NO
BLOCK-5
1. YES
2. NO
PLAYBACK FROM INTERNAL MEMORY
BLOCK-1
1. YES
2. NO
BLOCK-2
1. YES
2. NO
BLOCK-3
1. YES
2. NO
BLOCK-4
1. YES
2. NO
BLOCK-5
1. YES
2. NO
TURN KNOB TO SELECT MENU. SELECT THE ITEM OF EACH MENU BY
TRACKBALL. NOTE: TRACKS & MARKS ONLY CAN BE SAVED IN
THE
BLOCK 3-5. WAYPOINTS & ROUTES CAN BE SAVED IN THE
BLOCK.
Operate internal memory
4. Rotate the [ENTER] knob to select item to save.
5. Press the [1] key to select “1. YES.”
6. Repeat steps 4 and 5 to save other items.
7. Rotate the [ENTER] knob to select BLOCK 1, 2, 3, 4 or 5 as appropriate.
BLOCK-1, 2: For track, mark, waypoint, route and setting data
BLOCK 3, 4, 5: For track and mark only
Note: If BLOCK-1 or 2 is used for backup (see paragraph 10.3.2), it cannot be
selected here.