Furuno GP-3500 - Manual (Page 80)

5. WAYPOINT
5-8
11. Use the numeric keys to enter the TD1 LORAN-C (or A).
12. Rotate the [ENTER] knob to select TD2 LORAN-C (or A).
13. Use the numeric keys to enter the TD2 LORAN-C (or A).
14. Follow step 10 in of “5.1.3 Entering waypoints by longitude and latitude
position.”
5.1.6 Entering waypoints by Decca LOPs
1. Press the [MENU] key to show the main menu.
2. Press the [8] key to show the PLOTTER SETUP menu.
3. Rotate the [ENTER] knob to select “TD DISPLAY.”
4. Press the [3] key to select “3. DECCA.”
5. Press the [MENU] key to return to the main menu.
6. Press the [1] key to show the WAYPOINTS LIST.
7. Press the [WPT] key to show the waypoint edit window.
8. Rotate the [ENTER] knob to select “COORDINATE”.
9. Press the [3] key “3. TD.”
WAYPOINT NAME 000001
LANE1
1 A:06.68
LANE2 2A:41.90
CHAIN 01 S BALTIC R-G
Waypoint edit window (DECCA)
10. Rotate the [ENTER] knob to select “LANE 1”.
11. Use the numeric keys to enter the LANE 1 value.
Enter the alphabet of the lane by pressing the appropriate numeric key referring
to the table below.
Numeric key Alphabet Numeric key Alphabet
[1] key A [6] key F
[2] key B [7] key G
[3] key C [8] key H
[4] key D [9] key I
[5] key E [0] key J
To enter “1F22.01”, for example, press [1], [6] (F), [2], [2], [0], [1] in that order.
12. Rotate the [ENTER] knob to select LANE 2.
13. Use the numeric keys to enter the LANE 2 value.
14. Follow from step 10 in “5.1.3 Entering waypoints by longitude and latitude
position.”