Furuno GP-3500 - Manual (Page 86)

5. WAYPOINT
5-14
5.7 Changing Waypoint Mark Size
(NavChart
TM
/FURUNO only)
You may change the size of all waypoint marks to small or large, or turn them off.
1. Press the [MENU] key to show the main menu.
2. Press the [7] key to show the CHART SETUP menu.
If the CHART SETUP menu does not appear, rotate the [ENTER] knob
clockwise.
3. Rotate the [ENTER] knob to select “WAYPOINTS.”
7. CHART SETUP
GOTO CONTOUR LINES SETUP
OFFSET CHART POS
1. YES 2. NO
LAT/LON GRID 0. OFF
TEXT INFORMATION 1. YES 2. NO
WAYPOINTS 1. LARGE 2. SMALL 3. OFF
WAYPOINT NAME 1. LARGE 2. SMALL 3. OFF
CHART BORDER LINE 1. YES 2. NO
LANDMASS 0. OFF
TRIMMING BORDER LINE 0. OFF
BACKGROUND 0. OFF
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Chart setup menu
4. Press the appropriate numeric key to select “1. LARGE”, “2. SMALL” or “3.
OFF.”
LARGE: Waypoints are shown in actual mark shape
SMALL: Waypoints are displayed with an “x” regardless of mark shape
selected.
OFF: All waypoints are off except the waypoint destination and route.
5. Press the [MENU] key several times to close the menu.